REMOVE YOUR STOCK HEAD UNIT

THE PARTS LIST

Remove dash trim piece. Use #6 Hex Driver on the 4 visible screws picture below. Gently slide the trim piece forward by grabbing the edges with your fingers. The trim piece will slide out leaving the mounted stereo in place.

With the trim removed, you should be able to see 4 10mm bolts facing you, 2 on each side of the stereo. Remove the 4 bolts. You'll need the extension for the bottom bolts on each side because they are recessed a few inches. Below is where they are located with respect to the stereo, and the other side is similar.

Slide out the stereo out as far as you can. There are 2 main harnesses(possibly 3 if you have a disc changer or extra amp), and 1 antenna plug by itself. The antenna plug just plops straight out, and the other two harnesses can be removed by pressing the tab on the plastic of the harness. Below is a picture of the back of the stereo and what's hilighted is where the 2 side-by-side harnesses and antenna plugged into mine.

Please feel free to if you have any questions. Happy RAV'n!